Category: Hydraulic Equipment

The main process ofcasing pipeproduction line mainly consists of: descaling machine, flaw detector, pipe threading machine, screwing machine, hydraulic press, diameter machine, steel pipe high pressure fog spray paint machine, automatic length measuring, spray marking, packing equipment.

1. Descaling machine: divided into two methods: steel brush rust removal and shot blasting, the main function is to treat the surface oxide scale of the raw material pipe;

2. Flaw Detector: It is divided into two common methods: eddy current testing and ultrasonic testing. The main function is to detect the pipe material and check whether the pipe meets the production requirements.

3. Pipe threading machine: Pipe thread CNC lathe is mainly responsible for the processing of pipe thread. Common buckle types are: short round buckle and long round buckle and special buckle;

4. Screwing machine: It is divided into two types: the planetary clamping type and the inner curved surface clamping. The main purpose is to tighten the coupling after the pipe thread processing to protect the thread;

5. Hydraulic press: It is mainly to carry out water pressure test on the pipe body to check whether the steel pipe meets the production requirements;

6. Path machine: mainly to check whether the inside of the steel pipe is smooth;

7. Steel pipe high pressure fog spray paint machine: mainly after the pipe is finished, prevent the pipe from rusting in the outdoor and transportation process, and carry out automatic anti-corrosion spraying on the surface of the professional equipment;

8. Steel pipe length measurement: The main purpose is to automatically measure the pipe number, furnace batch number, length, weight and other data, and then print the content onto the pipe surface to facilitate the use of the unit for identification;

9. Marking machine: professional equipment for printing the pipe body mark;10. Packing: Bundling and discharging the finished pipe.

byAlma Abell

Many of us ride everything from hydraulic elevators to Traction Elevators in Washington DC every day with no concern for their safety. They rely on the complicated mechanisms and safety features in all modern day elevators to get quickly and safely from one floor to the other.

Although, elevators plummeting to the floor of the buildings they service very rarely occur, you can be sure that when it does the events are catastrophic to say the least. If you are ever in any plummeting Traction Elevators in Washington DC, there are a few tips that you can follow to increase your chances of survival. Read on for a few of those tips below.

Remain Calm

You need to know that you have more of a chance of surviving an elevator falling, if you remain calm and try to reason out the problem. The elaborate safety features built into modern elevators are there to help you along the way. With the strong cables attached to elevators today, they very rarely ever fall all the way to the bottom floor. So, you have more of a chance of getting hurt than you do of dying in an elevator accident.

Lie Flat

The first thing you will want to do is lie flat on the floor, in the middle of the elevator or as close to it as possible. Put your hands over your head to protect it and your face from any falling debris.

Never Remain Standing

You never want to remain standing and jump as the elevator hits the bottom to save yourself. This is going to do you no good, because gravity won’t let it. The safest place to be is in the middle of the elevator laying on the floor. You want to ignore everything that you see in the movies, because it is just the movies of course.

These are just a few tips that you should follow to avoid being hurt in an elevator accident. You can visit the website today for more information on elevators and what you can do to save yourself in a fall. You should remain calm and lie flat if you want to survive.